*這里介紹幾個常用的應用實例來簡單接觸下遍歷算法的基礎應用：

*--1、遍歷文件
dqml='C:' &&需掃描的盤符
Use
Create Cursor mylsdbf (wjmc c(120),wjcd N(10),wjrq d,wjshj c(10),wjsx c(6))
xGS=1
xCD=0
Append Blank
Replace wjmc With dqml
Do While !Eof()
    nRecn=Recno()
    dqml=Alltrim(wjmc)+'/'
    x=Adir(Mysz,(dqml+'*.*'),'rashd')
    If x<>0
        For I=3 To x
            Mysz(I,1)=dqml+Mysz(I,1)
            xGS=xGS+1
            xCD=xCD+Mysz(I,2)
        Endfor
        Append From Array Mysz For Alltrim(wjmc)<>'.' And Alltrim(wjmc)<>'..' And 'D'$wjsx
    Endif
    Go nRecn
    Skip
Enddo
Browse
Use

*--2、遍歷控件
Create Cursor kjsl(kjname C(254))
Insert Into kjsl(kjname) Values('thisform')
Do While !Eof()
    nRECN=Recno()
    kjmc=Alltrim(kjname)
    =Amembers(aval,&kjmc,2)
    If Type('aval')<>'U'
        For Each cval In aval&&aval控件名稱數組，cval數組值
            Insert Into kjsl(kjname) Values(kjmc+'.'+cval)
        Endfor
    Endif
    Release aval
    Go nRECN
    Skip
Enddo
Browse
　
*--3、遍歷TreeView 中指定節點及其所有子節點的算法
** aChild[1,3]是一個自定義表單數組屬性
Lparameters cnode
** 將所有的子節點的特性都放到表單的數組屬性 aChild 中去
** 以便在要?jiǎng)h除一個節點的時候，刪除所有子節點的數據
Local oCurNode, nArrayCount
nArrayCount = 1
oCurNode = cnode && 紀錄下第一個子節點的特性
This.aChild[1,1] = oCurnode.Key
This.aChild[1,2] = oCurnode.Text
This.aChild[1,3] = oCurnode.Index
Do While oCurNode.Children > 0
    oCurNode = oCurNode.Child
    If oCurNode.Children > 0 && 深入到最后一層
        Loop
    Endif
    Do While .T.
        If oCurNode.Key = cNode.Key
            Exit
        Endif
        nArrayCount = nArrayCount + 1
        If Isnull(oCurNode.Next) && 如果當前節點之后沒有節點了
            Dimension This.aChild[nArrayCount, 3] && 紀錄當前節點的信息
            This.aChild[nArrayCount, 1] = oCurNode.Key
            This.aChild[nArrayCount, 2] = oCurNode.Text
            This.aChild[nArrayCount, 3] = oCurNode.Index
            If !(oCurNode.Key = cnode.Key) && 如果當前節點已經是最高節點了，則立刻退出
                oCurNode = oCurNode.Parent && 否則，后退一層，并重新開始循環
                Loop
            Else
                Exit
            Endif
        Else && 當前節點之后還有節點，檢查后續的節點
            oCurNode = oCurnode.Next && 將下一個節點設為當前節點
            Dimension This.aChild[nArrayCount,3] && 紀錄該節點的特性
            This.aChild[nArrayCount,1] = oCurnode.Key
            This.aChild[nArrayCount,2] = oCurnode.Text
            This.aChild[nArrayCount,3] = oCurnode.Index
            If oCurNode.Children > 0 && 如果該節點有子節點，則退出，返回到第一個循環
                Exit
            Endif
        Endif
        If oCurNode.Children > 0
            Exit
        Endif
    Enddo
    If oCurNode.Key = cNode.Key
        Exit
    Endif
Enddo